N1465 - Imperial Reinforced Self Locking Rings For Shafts

home / products / circlips / n1465
 

N1465 - Imperial Reinforced Self Locking Rings For Shafts

Fraction Ring Dimensions Supplementary Data
Thickness (s) Outside Diameter (d4) Tolerance Number of Teeth Ring Height (s1) Tolerance Weight lb/1,000 Min Distance of Retained Part from End of Shaft (X) Retaining Force lb.f (H)

Note all values
are imperial

Unstressed

N1465-0009   3/32 0.011 / 0.009 0.326 ± 0.005 3 0.029 ± 0.005 0.16 0.058 27
N1465-0012   1/8 0.011 / 0.009 0.366 ± 0.005 4 0.029 ± 0.005 0.19 0.058 38
N1465-0015   5/32 0.011 / 0.009 0.397 ± 0.005 4 0.029 ± 0.005 0.22 0.058 45
N1465-0018   3/16 0.011 / 0.009 0.444 ± 0.005 6 0.031 ± 0.007 0.27 0.062 55
N1465-0025   1/4 0.011 / 0.009 0.522 ± 0.005 6 0.037 ± 0.008 0.39 0.074 58
N1465-0031   5/16 0.011 / 0.009 0.584 ± 0.005 8 0.037 ± 0.008 0.44 0.074 60
N1465-0037   3/8 0.011 / 0.009 0.645 ± 0.005 8 0.037 ± 0.008 0.48 0.074 65
N1465-0043   7/16 0.017 / 0.013 0.737 ± 0.005 10 0.045 ± 0.009 0.96 0.090 120
N1465-0050   1/2 0.017 / 0.013 0.828 ± 0.010 10 0.054 ± 0.010 1.27 0.108 120
N1465-0056   9/16 0.017 / 0.013 0.889 ± 0.010 12 0.054 ± 0.010 1.38 0.108 125
N1465-0062   5/8 0.017 / 0.013 0.951 ± 0.010 12 0.054 ± 0.010 1.47 0.108 135
N1465-0075   3/4 0.017 / 0.013 1.076 ± 0.010 14 0.054 ± 0.010 1.65 0.108 140
N1465-0087   7/8 0.017 / 0.013 1.203 ± 0.010 16 0.054 ± 0.010 1.96 0.108 140
N1465-0100 1       0.017 / 0.013 1.327 ± 0.010 18 0.054 ± 0.010 2.29 0.108 140