Spiral Rings, Wave Springs and Wave Washers

home / products / wave and spiral rings

 

View Spiral Rings Brochure

Brochure
 

Spiral Rings are an easy to install alternative to stamped retaining rings. They are formed by an exclusive Circular-Grain process which edgewinds pre-hardened spring tempered flat wire to exact tolerances. Grain structure of the metal is circumferential instead of linear providing exceptional strength, yet flexible 360° retaining surface.
 

Internal
Metric (DNH)
Imperial (WHM)

External
Metric (DNS)
Imperial (WSM)


 

Material
Carbon Steel
302 Stainless Steel
316 Stainless Steel

Finish
Oil Dip (Carbon Steel)
Self Finish (Stainless Steel)


Enquiry Checklist


Wave Springs

Wave Springs

Brochure

Wave Springs offer an alternative to coiled springs with specific advantages such as; reduced working height with equal deflection and equal force which is ideal for tight radial and axial spaces. They are edge wound and offer similar manufacturing and tolerance advantages to Spiral Rings.
 

Single Turn
Standard (SSR)
Bearing Preload (SSB)
Narrow Section (SSR-N)

Crest-To-Crest
Plain Ends (C)
Squared-Shim (CS)

Material
Carbon Steel
302 Stainless Steel
316 Stainless Steel

Finish
Oil Dip (Carbon Steel)
Self Finish (Stainless Steel)
 

Enquiry Checklist


Wave Washers

Wave Washers are stamped metal washers with a wave profile to provide a preload between two surfaces. When loaded, it deflects like a spring to absorb shock, relieve friction, isolate, prevent loosening or distribute pressure. Important dimensions to consider are inside diameter, outside diameter, thickness, working height and working load.
 

Specification
Metric Table EPL

Handy Pak
Assortment

Metric HP10

Material
Carbon Steel & Stainless avaialble

Finish
Oil Dip Only

 

 

Application

Pre-load bearings in electric motors, the wave washer is installed in the bearing housing and works by maintaining force on the outer race of the ball bearing, ensuring smooth and quiet running, resulting in extended bearing life.

 

 

Laminar Seal Rings

                  Brochure       

                    
Laminar Seal Ring is a metallic labyrinth seal consisting of multiple rings in a groove. This arrangement of the rings and the specific orientation of the rings are dictated by the application and the severity of the environment.
  • Seals assembly components from contamination
  • Numerous configurations available
  • Produced from metal; not rubber, neoprene, or other non-metallic materials
  • Able to withstand high temperatures and corrosive environments

more information

 

Laminar Ring Application

   
   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Please contact our sales staff for further information or assistance in ordering.