Circlips (Australia) Pty. Ltd.
Circlips <- -> Disc Springs -> Spiral Rings, Wave Springs & Wave Washers -> Roll Pins -> Moulded & Spring Steel Fasteners -> Pliers, Applicators & Feeders -> Handy Pak Assortments & Merchandising
Home Return to Products Distributors About Us Contact Us
Go to Imperial

Go to Circlip SelectionCirclip Selection

M1308 - Metric Balanced Lug - For Bores
Reference
Number		 Nominal
Diameter (d1)		 Circlip Dimensions Groove Dimensions Pliers
Thickness (s) Tolerance Unstressed
Diameter (d3)		 Tolerance Beam (b) Tolerance Lug Hole (d5) min Weight
Kg/1,000		 Groove Diameter (d2) Tolerance Groove
Width (m)		 Radial Depth of Groove (t)

Manufacturer's Choice

Unstressed

 M1308-0120 12 0.60 - 0.05 13.1 + 0.42   - 0.13 1.8 ± 0.1 1.0 0.25 12.6 + 0.11 0.70 0.30 HC 0
M1308-0150 15 0.80 - 0.05 16.1 + 0.42   - 0.13 2.0 ± 0.1 1.0 0.41 15.7 + 0.11 0.90 0.35 HC 0
M1308-0160 16 1.00 - 0.06 17.3 + 0.42   - 0.13 2.1 ± 0.1 1.3 0.53 16.8 + 0.11 1.10 0.40 HC 1
M1308-0170 17 1.00 - 0.06 18.3 + 0.42   - 0.13 2.1 ± 0.1 1.3 0.58 17.8 + 0.11 1.10 0.40 HC 1
M1308-0180 18 1.00 - 0.06 19.5 + 0.42   - 0.13 2.2 ± 0.1 1.3 0.62 19.0 + 0.15 1.10 0.50 HC 1
M1308-0190 19 1.00 - 0.06 20.5 + 0.42   - 0.13 2.2 ± 0.1 1.3 0.66 20.0 + 0.15 1.10 0.50 HC 1
M1308-0200 20 1.00 - 0.06 21.5 + 0.42   - 0.13 2.3 ± 0.1 1.3 0.80 21.0 + 0.15 1.10 0.50 HC 1
M1308-0210 21 1.00 - 0.06 22.5 + 0.42   - 0.13 2.4 ± 0.1 1.3 0.81 22.0 + 0.15 1.10 0.50 HC 1
M1308-0220 22 1.00 - 0.06 23.5 + 0.42   - 0.13 2.4 ± 0.1 1.3 0.83 23.0 + 0.15 1.10 0.50 HC 1
M1308-0240 24 1.20 - 0.06 25.9 + 0.42   - 0.21 2.8 ± 0.1 1.5 1.30 25.2 + 0.21 1.30 0.60 HC 1
M1308-0250 25 1.20 - 0.06 26.9 + 0.42   - 0.21 2.8 ± 0.1 1.5 1.40 26.2 + 0.21 1.30 0.60 HC 1
M1308-0260 26 1.20 - 0.06 27.9 + 0.42   - 0.21 3.0 ± 0.1 1.5 1.50 27.2 + 0.21 1.30 0.60 HC 1
M1308-0270 27 1.20 - 0.06 29.1 + 0.42   - 0.21 3.0 ± 0.1 1.5 1.53 28.4 + 0.21 1.30 0.70 HC 1
M1308-0280 28 1.20 - 0.06 30.1 + 0.50   - 0.25 3.1 ± 0.1 1.5 1.80 29.4 + 0.21 1.30 0.70 HC 1
M1308-0300 30 1.20 - 0.06 32.1 + 0.50   - 0.25 3.2 ± 0.1 1.5 2.03 31.4 + 0.25 1.30 0.70 HC 1
M1308-0320 32 1.20 - 0.06 34.4 + 0.50   - 0.25 3.3 ± 0.1 1.5 2.05 33.7 + 0.25 1.30 0.85 HC 1
M1308-0330 33 1.20 - 0.06 35.5 + 0.50   - 0.25 3.3 ± 0.1 1.5 2.35 34.7 + 0.25 1.30 0.85 HC 1
M1308-0350 35 1.50 - 0.06 37.8 + 0.50   - 0.25 3.4 ± 0.1 1.7 3.20 37.0 + 0.25 1.60 1.00 HC 1
M1308-0360 36 1.50 - 0.06 38.8 + 0.50   - 0.25 3.6 ± 0.1 1.7 3.23 38.0 + 0.25 1.60 1.00 HC 1
M1308-0380 38 1.50 - 0.06 40.8 + 0.50   - 0.25 3.8 ± 0.1 1.7 3.68 40.0 + 0.25 1.60 1.00 HC 1
M1308-0400 40 1.75 - 0.06 43.5 + 0.90   - 0.39 4.2 ± 0.2 2.0 4.75 42.5 + 0.25 1.85 1.25 HC 2
M1308-0420 42 1.75 - 0.06 45.5 + 0.90   - 0.39 4.2 ± 0.2 2.0 5.20 44.5 + 0.25 1.85 1.25 HC 2
M1308-0450 45 1.75 - 0.06 48.5 + 0.90   - 0.39 4.2 ± 0.2 2.0 6.00 47.5 + 0.25 1.85 1.25 HC 2
M1308-0470 47 1.75 - 0.06 50.5 + 1.10   - 0.46 4.7 ± 0.2 2.0 6.50 49.5 + 0.25 1.85 1.25 HC 2
M1308-0480 48 1.75 - 0.06 51.5 + 1.10   - 0.46 4.7 ± 0.2 2.0 7.00 50.5 + 0.30 1.85 1.25 HC 2
M1308-0500 50 2.00 - 0.07 54.2 + 1.10   - 0.46 5.2 ± 0.2 2.5 8.50 53.0 + 0.30 2.15 1.50 HC 3
M1308-0520 52 2.00 - 0.07 56.2 + 1.10   - 0.46 5.2 ± 0.2 2.5 9.00 55.0 + 0.30 2.15 1.50 HC 3
M1308-0550 55 2.00 - 0.07 59.2 + 1.10   - 0.46 5.2 ± 0.2 2.5 10.00 58.0 + 0.30 2.15 1.50 HC 3
M1308-0570 57 2.00 - 0.07 61.2 + 1.10   - 0.46 5.2 ± 0.2 2.5 10.25 60.0 + 0.30 2.15 1.50 HC 3
M1308-0580 58 2.00 - 0.07 62.2 + 1.10   - 0.46 5.2 ± 0.2 2.5 10.50 61.0 + 0.30 2.15 1.50 HC 3
M1308-0600 60 2.00 - 0.07 64.2 + 1.10   - 0.46 5.2 ± 0.2 2.5 11.25 63.0 + 0.30 2.15 1.50 HC 3
M1308-0620 62 2.00 - 0.07 66.2 + 1.10   - 0.46 5.2 ± 0.2 2.5 11.75 65.0 + 0.30 2.15 1.50 HC 3
M1308-0650 65 2.50 - 0.07 69.2 + 1.10   - 0.46 5.7 ± 0.2 2.5 16.25 68.0 + 0.30 2.65 1.50 HC 3
M1308-0670 67 2.50 - 0.07 71.5 + 1.10   - 0.46 5.7 ± 0.3 2.5 17.30 70.0 + 0.30 2.65 1.50 HC 3
M1308-0680 68 2.50 - 0.07 72.5 + 1.10   - 0.46 5.7 ± 0.3 2.5 17.75 71.0 + 0.30 2.65 1.50 HC 3
M1308-0720 72 2.50 - 0.07 76.5 + 1.10   - 0.46 6.0 ± 0.3 2.5 19.60 75.0 + 0.30 2.65 1.50 HC 3
M1308-0800 80 2.50 - 0.07 85.5 + 1.30   - 0.54 6.0 ± 0.3 2.5 22.90 83.5 + 0.35 2.65 1.75 HC 3
M1308-0850 85 3.00 - 0.08 90.5 + 1.30   - 0.54 6.6 ± 0.3 3.0 30.00 88.5 + 0.35 3.15 1.75 HC 3
M1308-0900 90 3.00 - 0.08 95.5 + 1.30   - 0.54 6.6 ± 0.3 3.0 33.00 93.5 + 0.35 3.15 1.75 HC 3
M1308-0950 95 3.00 - 0.08 100.5 + 1.30   - 0.54 7.4 ± 0.3 3.0 37.50 98.5 + 0.35 3.15 1.75 HC 3
M1308-1000 100 3.00 - 0.08 105.5 + 1.30   - 0.54 7.4 ± 0.3 3.0 41.90 103.5 + 0.35 3.15 1.75 HC 3
  © 2004 Circlips (Australia) Pty. Ltd.Home : Brochures : Links : Sitemap
Privacy Statement, Disclaimer